38 FP-550F
49H (73) PRINTING THE CONTENT OF THE FISCAL MEMORY UNDER THE
NUMBER OF A FISCAL ENTRY INTO THE MEMORY
Data field: <Start>, <End>
Response: None
Start: The number of the starting fiscal entry - 4 bytes
End: the number of the ending fiscal entry - 4 bytes
The command leads to the printing of a detailed report of the fiscal memory from one
selected number to another.
4Ah (74) READING THE STATUS OPTIONS
Data field: [Option]
Response: <S0><S1><S2><S3><S4><S5>
Option: One byte with the following meanings:
W: All printer buffers must be printed out first
X: The above condition (W) is not mandatory
Sn: Status byte N.
4 Ch (76) STATUS OF THE FISCAL TRANSACTION
Data field: [Option]
Repsonse: Open, Items, Amount [,Tender]
Option: =’T’ If the parameter has been selected the command will return the infor
mation on the current state of the sum due for payment by the client.
Open One byte which is ‘1’ if a fiscal or a non-fiscal receipt has been opened
(which it is can be understood from the status bytes) and ‘0’ if there is no
opened receipt.
Items The number of sales registered on the on the current or last fiscal receipt -
4 bytes.
Amount The sum from the last fiscal receipt - 9 bytes with a mark.
Tender The sum tendered against the current or the last receipt - 9 bytes with a
mark.
The command supports the PC application’s ability to monitor the status and if needed
to restore and complete am already started fiscal operation which has been interrupted
on emergency or out of time - for example as a result of a power failure.
4Fh (79) SUMS ACCUMULATED IN THE FISCAL MEMORY FOR A SELECTED
PERIOD
Data field: <Start> <End>
Response: None
Start: Starting date - 6 bytes (DDMMYY)
End: End date - 6 bytes (DDMMYY)
The command generates the printing out of a periodic financial report.
To Next Page
Loading...
