46 FP-550F
30
-TaxX Sum or percent - depends on ‘Type’
The command returns information on the different tax groups for each separate entry
and or a selected period of time. Periodic references for longer time periods may take
a few seconds to process.
73h (115) PROGRAMMING A GRAPHIC LOGO
Data field: <RowNum>, <Data>
Response: None
RowNum Shows the line which is being programmed - a digit between 0 and 95
Data Graphic data. Two symbols for each byte of information are entered in the
xehadecimal code. The length of the data is up to 54 bytes and if they are
less an automatic addition of two “00” follows.
This command offers the option to define a graphic logo with dimensions 54 x 12 mm
(432 x 96 dots) designed by the user himself. The printing of this logo is activated with
command 43. It is printed out immediately before the HEADER - at the beginning of
each fiscal or non-fiscal receipt. In order to define the whole logo, the command must
be executed 96 times - once for each line. After RESET of the memory, the logo is
blank.
To Next Page
Loading...
