1 DATECS LP-50
10
y Use a shielding wire or twisted pair wire for a signal line, in order to minimize
noise effect. Do not route the cable too long or connect it to a noisy device.
Connection to a noisy device could cause erroneous printing due to corrupt
data, and so on.
y Use the equipment in an environment where there is s plug socket near the
main body and you can easily disconnect the power plug from it, to shut off the
power.
y When the equipment will not be used for a long period of time, unplug it and
remove the paper roll from it.
y When transporting the equipment, remove the paper roll from paper holder.
To Next Page
Loading...
