User’s Manual
11
PRECAUTIONS FOR HANDLING
Do not handle the equipment in the following manners, because
problems may result.
y Do not use any other power source besides the accessory DC/AC adapter.
Also, do notg use the AC adapter for other purposes.
y Do not print without paper.
y Do not drop or put any foreign object, such as a clip, pin, or the like, inside the
printer.
y Do not spill any liquid or spray any chemical-containing liquid
over the equipment.
y Never use a pointed object, such as a pen, to operate the operation panel.
y Do not use Scotch tape to fasten paper together for continuous use. It could
damage the printing head.
y Never pull the set paper forcibly. When Opening/closing the printer cover,
take care that the paper will not be caught. It could cause the paper to jam.
y Be sure to use the specified paper. Use of other paper could deteriorate the
print quality or cause a problem with the printing head.
To Prevent and Spreading of Damage
y Never touch the printing head motor, or paper cutting blade. Your finger may
be cut.
y During power-on or immediately after printing, do not touch electrical parts or
moving parts, such as the mechanism, motor, internal dear, etc. They may be
very hot and can bum your hand/finder.
y Be careful to avoid bodily injure or damaging other objects with an edge of
sheet metal.
y Should any error occur while operating the equipment, stop it immediately
and disconnect the power plug from the plug socket.
y Only a qualified serviceman is allowed to disassemble or repair the printer.
y Should a problem occur, leave solving it to our serviceman. Do not disas
semble the equipment on your own.
y When opening/closing the printer cover, and so on, be careful not to catch
your hand or finger on the equipment.
y After using the equipment, turn off the power switch and unplug the AC
adapter from a plug socket.
!
To Next Page
Loading...
