EasyManua.ls Logo

Datecs MP-55B ESTONIA - Table 01: Item Parameters

Default Icon
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DP-50 / DP-50D / MP55-B - USERS MANUAL
Table 01: Item parameters
This table consist 1000 rows - as is the maximal items number.
Each row consist 11 fields.
Field No
Description Range Note
1
PLU code
1 ÷ 9999 Default: the current row number
2 Name Up to 22
characters
Default:
For row 1 to 4:DEPARTMENT1-DEPARTMENT4
For the remaining rows (от 5 to 1000) : Space
3 Price Up to 8 digits Default: 0.00
4 Quantity Sold quantity of
this item
Read-only
5 Department
number
From 1 to 4 Default:
For row от 1 - 4 the stands number, respectively 1-4;
For the remaining rows (from 5 to 1000) : 4;
6 Item group From 1 to 10 Default: 1
7 Tax group From 1 to 8 Default:
For row 1 to 4: 2,
For the remaining rows: 0
8
PLU or PLU Type
0,1,2,4,5
Sale is possible:
0: Only with the programmed price
1: With programmed or free entered price
2: With a price which entered value is less than
the programmed one;
4 : Same as 1 ( with programmed and free
entered price) and automatically next sale of
a linked item. The code of the linked item
must be given into field 10, and the quantity
must be given into field 11. The quantity must
be given as shown: xxxxx.xxx, the dec.point
is fixed and can not be entered. The right 3
positions represents the fractional part of the
quantity
5: Same as 1 but with automatically finishing the
receipt with cash payment.
Default :
for items 1 to 4: 1
for items 5 to 1000: 0
9 Reserved
10 Barcode–most
significant digits
Up to 6 digits Default : 100000
11
Barcode–less
significant digits
8 digits Default : 0
Note: When an item parameter has unallowable value its sale is not possible. The
sale is also not possible if the field "Tax group' has value 0.
Note: The parameters for each item are written on a separate row in the PLU
database. The row number from table 1 which the parameters of item are stored is
called code (or PLC code) of the item. It is recommended when the PLU-code of an
item is programmed, the value programmed to be equal to the row number of Table 1
in which the parameters of that item are stored.
18

Related product manuals