2: Installation
RT7000-MSOP 2-5
If the 7000RS option is installed, the COM1TXD and COM2RXD becomes a
2-wire bidirectional RS422/485 interface.
A 3-wire RS232 interface is also available on Accessory 2.
Automatic
Antenna
Tuners
The RT7000 interfaces with the complete line of Datron automatic antenna
tuners. This includes the older AT/RAT100 and RAT1000 as well as the newer
AT/RAT7000B and RAT1000B.
The AT/RAT100 and RAT1000A and RAT1000C connect to Accessory 2. The
AT/RAT7000 uses Accessory 3.
Data Terminal
Interface
The RT7000 interfaces with its own line of data terminals or to other external
units using Accessories 1 and 2.
External
Printers
A standard parallel printer connects to Accessory 1 to obtain a hard copy of
text messages stored in the RT7000.
ALE/Transcall/
Selcall Alarm
The external ALE/Transcall/Selcall alarm driver is available on Accessory 2.
External
Speaker
An external speaker attaches to the RT7000 at Accessory 2.
External
High-Power
Amplifiers
The RT7000 interfaces with all existing Datron high-power RF booster
amplifiers using Accessory 3.
To Next Page
Loading...
