3: Operation
3-25 RT7000-MSOP
Activating Voice Enhancement
The DSP-based Voice Enhancement option (7000VEM) suppresses various
types of noise and interference on voice communications.
The 7000VEM has two modes of operation. Mode 1 is for adaptive peaking
and reduces atmospheric noise and static normal with HF signals. Mode 2
adds the ability to remove man-made interferences like ignition and power
line noises.
1. Turn the FUNCTION knob until the OPT icon flashes.
2. Press STATUS to turn the option ON.
3. Press ALPHA 21 and E.
Display: OPTION 1
TYPE x (briefly displays last mode entered)
4. Enter the mode (1 or 2) and press E.
Note: To verify that the 7000VEM option is installed, look for
OPT 1 MODULE to be displayed during start-up.
To Next Page
Loading...
