63
12 x Not used (zero sent in Main Dump)
13 x Not used (zero sent in Main Dump)
14 0 - 16 MIDI Channel; if = 0, data received on all MIDI channels.
Otherwise = channel number 1 – 16.
15 X Not used (zero sent in Main Dump)
16 0 – 127 Combo number 1 - 128
17 0 – 2 Combo Bank 1 to 3
18 0 - 1 MIDI Program Change enable
19 0 - 1 MIDI Pressure enable
20 0 - 1 MIDI Controller enable
21 0 - 1 MIDI SysEx enable
22 0 - 5 Pedal/CV 1 destination
23 0 - 5 Pedal/CV 2 destination
24 0 - 3 Velocity Curve
25 0 - 3 Pressure Curve
26 0 - 1 Local Control Off/On
27 0 - 1 Damper Polarity; 0 = normally open, 1 = normally closed
Note: Some parameters are not used in order to maintain the closest match with standard
Evolvers.
To Next Page
Loading...