33
Tempest Operation Manual
Highpass
Highpass
Frequency: 0...127—Sets the lter cutoff frequency for the
2-pole high-pass lter. A setting of 0 passes all frequencies.
Turning the control up attenuates frequencies below the cutoff
at a slope of -12dB/octave.
Key > Freq: 0...127—Sets the amount of modulation from the note number—
from either the beat, the pads, or via MIDI—to the lter cutoff frequency.
Sometimes called key tracking in keyboard synths, because the cutoff frequency
“tracks” notes played on the keyboard.
To Next Page
Loading...