Davey Torrium 2 TT45

Please pass these instructions on to the operator of this equipment.
WARNING: The Torrium2 controller, pump and associated pipework operate
under pressure. Under no circumstances should the Torrium2 controller, pump
or associated pipework be disassembled unless the internal pressure of the
unit has been relieved. Failure to observe this warning will expose persons to
the possibility of personal injury and may also result in damage to the pump,
pipework or other property.
WARNING: Failure to follow these instructions and comply with all applicable codes
may cause serious bodily injury and/or property damage.
NOTE: Prior to installation remove the inlet and outlet
pipe transport plugs & associated seals from the suction
and/or discharge ports.
Pressure System Controller
Installation and Operating
Instructions

Davey Torrium 2 TT45 Specifications

General

Model	Torrium 2 TT45
Type	Controller
Max Flow Rate	45 L/min
Controller Type	Electronic
Maximum Water Temperature	60°C
Maximum Ambient Temperature	40°C
Inlet/Outlet Size	1 inch
Supply Voltage	240V

Summary

Important Safety and Pre-Installation Notes

General Safety Warnings

Critical warnings regarding pressure, disassembly, and compliance with codes.

Pre-Use Checks

Essential checks to ensure the controller is installed in a safe and dry environment.

Product Overview and Features

Torrium2 Controller Benefits

Description of the electronic flow control device and its operational advantages.

Installation Guidance

Controller Selection and Fitment

Guidance on selecting the correct model and fitting the controller to the pump.

Connecting Discharge Pipework

Details on fitting the Torrium2 directly to the pump or using adaptor flanges.

System Enhancements and Connections

Information on draw-off capacity, suction lines, discharge ports, and pipe connections.

Priming and Power Connection

Instructions for priming the system and making electrical power connections safely.

Operation and Monitoring

Status Indicator Lights

Explanation of the front panel indicator lights for operating conditions and faults.

Auto-Retry and Surge Protection

Details on auto-retry modes, water return, and electrical power surge protection.

Maintenance and Troubleshooting

Routine Maintenance

Guidelines for checking supplementary pressure tank air charge and using lubricants.

Troubleshooting Common Issues

A guide to diagnosing and resolving common pump and controller faults.

Davey Warranty Information

Warranty (Inside the USA)

Details of the warranty coverage for products sold within the United States of America.

Warranty (Outside the USA)

Details of the warranty coverage for products sold outside the USA.