-7-
or transits to view the laser beam.
Serious eye injury could result.
DO NOT stare directly at the laser
beam or project the laser beam
directly into the eyes of others.
Serious eye injury could result.
Use caution when using instruments
in the vicinity of electrical hazards.
Magnets
IEC 60825-1:2007-03
<
1 mW, 635 nm
Keep the tool and laser
target away from cardiac
pacemakers. The magnets
of the tool and laser target
plate generate a field that can impair
the function of cardiac pacemakers.
Keep the tool and laser target away
from magnetic data medium and
magnetically-sensitive equipment.
The effect of the magnets of the tool
and laser target plate can lead to
irreversible data loss.
Use and care
Use the correct tool for your
application. The correct tool will do
the job better and safer.
Do not use the tool if the switch does
not turn it on and off. Any tool that
cannot be controlled with the switch
is dangerous and must be repaired.
Store idle tool out of the reach of
children and do not allow persons
unfamiliar with the tool or these
instructions to operate the tool.
Tools are dangerous in the hands of
untrained users.
Maintain tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
operation. If damaged, repair tool
before use. Many accidents are
caused by poorly maintained tools.
Use the tool, accessories, etc., in
accordance with these instructions
and in the manner intended for the
particular type of tool, taking into
account the working conditions and
the work to be performed. Use of
the tool for operations different from
those intended could result in a
hazardous situation.
SAVE THESE INSTRUCTIONS.
INTENDED USE
The instrument is intended for determining and checking precise horizontal
and vertical (4200HV only) lines. The instrument is suitable for indoor and
outdoor use.
To Next Page
Loading...
