With David White
your sights are set
on precision and accuracy.
Congratulations! You’ve purchased a David White builder/contractor
instrument, American-made and known throughout the world for
precision and accuracy.
The purpose of this booklet is to acquaint you with the instrument,
its components, proper care and handling.
Our levels and level-transits are constructed to withstand
extremely rugged field use. Like all precision instruments,
however, they should be treated with reasonable care to
prolong life and accuracy.
Quality and innovation since 1900.
All instruments are adjusted when they are shipped from the
factory. It is the customer’s responsibility to check and to ensure
instruments are adjusted prior to using.
David White is not responsible for errors caused by instruments
that are out of adjustment.
Contact your distributor, dealer or David White for
information on the nearest facility to check if your instrument
is properly adjusted. Some customers may choose to check
the instrument themselves. This can be done by following
the “Checking for Calibration” instructions at the back of this
manual. All actual adjustments must be done by a qualified
service facility.
All specifications are subject to change without notice.
To Next Page
Loading...
Need help?
General
