DAVID D2000 - Bottom Plate Removal and Reinstallation

9
MAINTENANCE AND CARE
Fig. 1
Fig. 2
Removing and Reinstalling
the Bottom Plate
WARNING! To Reduce the Risk
of Electrical Shock or Injury From
Moving Parts, Unplug Before Servicing
orCleaning.
To Remove the Bottom Plate:
• Press the handle release pedal to place
the vacuum cleaner in the flat position.
• Turn the vacuum cleaner over,
exposing the bottom plate.
• Turn the two screws a quarter turn
to release the bottom plate (Fig. 1).
Remove the bottom plate.
• Reinstall the bottom plate by aligning
the front edge of the bottom plate into
the notches inside the nozzle housing
(Fig. 2).
• Press the bottom plate into position
until the plate “clicks” on both sides.
Tighten the two screws a quarter turn
to secure the bottom plate.