13
PROBLEM SOLVING GUIDE
Troubleshooting
WARNING! To Reduce the Risk of Electrical Shock or Injury From Moving Parts,
Unplug Before Servicing or Cleaning.
CAUTION! To Reduce the Risk of Electric Shock, Do Not Handle Plug or Appliance
with Wet Hands.
PROBLEM POSSIBLE REASON POSSIBLE SOLUTION
Vacuum won’t
turn on
Power cord not firmly plugged in Plug cord in firmly
Blown fuse or tripped breaker
Check house fuse or breaker.
Replace fuse/reset breaker.
Needs service
Take to Authorized DAVID
Vacuum Retailer
Vacuum won’t
pick up or low
suction
Vacuum bag full Install new bag
Broken belt Replace belt
Worn brushroll Replace brushroll
Dust escaping
from vacuum
Vacuum bag not installed
properly
Install bag properly. Review
bag installation (page 8)
Any other service should be performed by an Authorized DAVID Vacuum Retailer.
To locate your nearest Authorized DAVID Vacuum Retailer, visit our website at
www.DAVIDSVACUUMS.COM or call 281-866-0027.
Key Replacement Parts
Genuine HEPA bags and belts are available from your authorized DAVID retailer.
For Best Performance
• Keep your vacuum clean and in good operating condition.
• Change the vacuum bag once a month or when the bag is 2/3 full to maximize
cleaning performance.
• Always use genuine vacuum bags and replacement parts. Use of other products
may result in poor cleaning performance, potential vacuum cleaner damage and
may void vacuum warranty. Genuine products are designed for maximum cleaning
performance.
• Have your vacuum checked annually by your Authorized DAVID Vacuum Retailer.
• Store your vacuum carefully in a dry area.
• For optimum cleaning performance and safety, follow your owner’s manual
instructions.
To Next Page
Loading...