EasyManua.ls Logo

Davies Craig LCD EWP/FAN DIGITAL - INSTALLATION RECOMMENDATIONS AND WARRANTY; INSTALLATION RECOMMENDATIONS; CAUTIONS; WARRANTY

Davies Craig LCD EWP/FAN DIGITAL
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 11 of 12
INSTALLATION RECOMMENDATIONS
For improved heater performance on vehicles which have the heater inlet (return) and
outlet ports in the mechanical pump housing, Davies Craig has available an Electric
Booster Pump Kit, EBP
15 #9001 (12V) or EBP23 #9050 (12V) or EBP40 #9040
(12V). These compact units fit neatly into the heater hose and boosts coolant flow
through the heater circuit and/or cylinder heads.
LPG (Liquid Petroleum Gas) vehicles require constant coolant flow through the LPG
converter once a EWP
Combo Pack has been fitted. We strongly recommend the
installation of Electric Booster Pump Kit, EBP
15 #9001 (12V) or EBP23 #9050 (12V)
or EBP40 #9040 (12V) to overcome freezing of the converter on engine start-up.
CAUTIONS
Engine temperature must be monitored closely at all times, especially,
immediately after EWP
installation and until the EWP
operation and
capability have been confirmed.
Do not use the vehicle’s engine management system or wiring
connected to the vehicle’s engine management system as an ignition
source because it may cause failure of the management system
and/or the electrical system. The ignition source must be a steady
positive supply of 12-29V DC.
These installation instructions may suit most applications but there are
circumstances surrounding some engine designs, environments, and the nature
of system involved, which may require other installation arrangements not
outlined here. Frequently Asked Questions (FAQ) are listed on our website
www.daviescraig.com.au . Emails can be directed to info@daviescraig.com.au
or Telephone +61 (0) 3 9369 1234 during business hours.
WARRANTY
Davies, Craig Pty Ltd warrants for a period of two years or 2000 hours continuous
running (whichever is the lesser) from the date of purchase. Davies, Craig shall carry
out, free of cost, any repairs that are reasonably necessary to correct any fault in the
operation of your Davies, Craig product provided that such a fault is directly attributable
to a defect in the workmanship or materials used in the manufacture of the part(s) and
is not due to installation other than described in these instructions. Labour and
consequential costs are excluded.
DAVIES, CRAIG PTY. LTD.
Register your warranty at: daviescraig.com.au