Product # 7717
MOUNTING POLE KIT
INSTALLATION MANUAL
This manual covers use of the Mounting Pole Kit with the Integrated Sensor
Suite (ISS) of the Vantage Pro
TM
system. (The kit can also be used with other
Davis Instruments sensor arrays, applying the principles shown here with the
ISS. On page 4, you may need to use a second U-bolt during step 2 .)
COMPONENTS
The mounting kit includes the following:
TOOLS AND MATERIALS NEEDED
In addition to the hardware shown above, you may need some of the following
tools and materials:
• Adjustable wrench
• Drill with 1/4" (6 mm) bit
8" Cable Ties
1-1/8" Saddles
1-1/8" Saddle
5/16" Flat Washers
5/16" Flat Washers
Extension Tube (21" long)
Support Tube
(19.5" long, swaged end)
5/16" x 1-1/2"
U-Bolt
5/16" Lock Washers
5/16" Hex Nuts
5/16" x 3"
Lag Screws
Mtg_pole_kit 07395.298.fm Page 1 Wednesday, January 15, 2003 8:15 AM
To Next Page
Need help?
General