Davis Instruments Vantage VUE Sensor Suite User Manual

11
3. Select one of the three available radio buttons that best describes the type of TCP/IP
connection you want to setup:
• Local Device ID — Connects to the WeatherLinkIP data logger through a Local
Area Network connection. Use this option if your computer is on the same subnet
as your WeatherLinkIP data logger.
• Remote IP Address — Connects the WeatherLinkIP data logger and station to
the WeatherLink Software through a remote connection using an IP address. This
connection generally requires a static IP address.
Note: This option is only used if your WeatherLinkIP-equipped Envoy is at a location on the Internet that
is remote from the location of the computer on which your are running your WeatherLink
software. It is an advanced setup option. See the WeatherLink Online Help for more information.
• Web Download — Downloads archived data that has been automatically
uploaded to WeatherLink.com.
For a Local Connection:
1. Click Local Device ID.
2. Click Find to find the Device ID for the data logger.
3. Click Test to verify communication.
4. Click OK to save the Communications Port settings.
For Web Download:
1. Click Web Download.
Note: Choosing Web Download inactivates functions that require communication with the Envoy.
2. Enter the user ID and password you created on www.weatherlink.com.
3. Click OK to save the Web Download settings.
Set Transceiver
Your Weather Envoy is set at the factory to “listen” to the ISS with ID 1. Since the
transmitter ID of your ISS has also been factory set to ID 1, you should not have to
change this setting. However, if you do change the ISS ID, use the Set Transceiver
dialog box to change your Weather Envoy to the “listen” to the new ID.
Note: This dialog box is the only available tool for configuring the transmitter ID and repeater ID settings
on your Weather Envoy.
To set transceiver options:
1. Select Set Transceiver from the Setup menu; the dialog box displays.
Select a Station Type for each of the possible eight transmitter IDs the Envoy may be
receiving. See the WeatherLink Online Help System for more information on
configuring the stations, the retransmit feature and configuring the Envoy for using
repeaters.

Davis Instruments Vantage VUE Sensor Suite Specifications

General

Brand	Davis Instruments
Model	Vantage VUE Sensor Suite
Category	Weather Station
Language	English