DAVIS 7714 Radiation Shield User Manual

Product # 7714
R ADIATION S HIELD
M
ANUAL
This instruction manual will take you step-by-step through the process of
assembling and mounting your Radiation Shield. Please take the time to read
through this manual before beginning the process.
C
OMPONENTS
The Radiation Shield includes the following components. Please make sure
you have all listed components before continuing.
✦ Radiation Shield Parts
✦
Installation Hardware Kit
Cover Plate
Flat Plate
Open Plates (3)
Closed Plates (3)
Support Plate
Wall Mount Bracket
1-1/2" U-Bolts
1/4" Flat Washers
1/4" Hex Nuts
1" (25 mm) Spacers
1/2" (13 mm) Spacers
Cable Clamp
Cable TieClip Mounts
#8 Wing Nuts (3)
#8 Hex Nuts (6)
#8 x 1-3/4"
(44 mm long)
Pan Head Screws
#4 Flat Washers
#4 x 1/2"
(13 mm long)
Pan Head
Self-Threading
Screws
#8 x 2-3/4"
(70 mm long)
Pan Head Screws
#8 x 5"
(127 mm long)
Threaded Studs
with push nuts
installed
#8 Split Lock
Washers (9)
#8 Flat Washers (12)

DAVIS 7714 Radiation Shield Specifications

General

Brand	DAVIS
Model	7714 Radiation Shield
Category	Accessories
Language	English

Summary

Components and Preparation

Radiation Shield Parts

Lists the physical components included with the Radiation Shield, such as cover, flat, and support plates.

Installation Hardware Kit

Details all the hardware components required for assembling and mounting the Radiation Shield.

Tools and Materials Needed

Lists the tools and additional materials required for the installation process.

Location Tips

Provides recommendations for the best placement of the Radiation Shield for optimal performance.

Installation and Sensor Attachment

Installation Options

Describes four basic orientations for mounting the Radiation Shield.

Attaching Temperature Sensor

Step-by-step guide for attaching the External Temperature Sensor or Stainless Steel Temperature Probe.

Attaching Temperature/Humidity Sensor

Step-by-step guide for attaching the External Temperature/Humidity Sensor.

Assembly and Mounting Procedures

Assembling Plates and Studs

Instructions for assembling the main plates and threaded studs of the Radiation Shield.

Assembly for Side/Pipe/Arm Mounting

Procedure for assembling the shield for mounting on a post side, pipe, or sensor arm.

Assembly for Top of Post Mounting

Procedure for assembling the shield specifically for mounting on top of a post.

Mounting on Post or Wall

Detailed steps for attaching the Radiation Shield to the side of a post or wall.

Mounting on Sensor Mounting Arm

Detailed steps for attaching the Radiation Shield to a Sensor Mounting Arm.

Mounting on Pipe

Detailed steps for attaching the Radiation Shield to a metal pipe.

Mounting on Top of Post

Instructions for mounting the Radiation Shield onto the top of a post.

Maintenance

Maintenance Instructions

Guidance on cleaning the shield and keeping plates free of obstructions for effective operation.