Daymak Boomerbuggy X Pro - CHARGING THE BOOMERBUGGY X PRO

15
Charging the Boomerbuggy X
Pro
The Boomerbuggy X Pro comes with a lead acid baery pack that needs to be charged
prior to use
To access the charge port, take the keys and at the back of the unit unlock the charge port
door. Inside you will nd a plug. Li up the cover and plug the charger into the socket.
Once the Mobility Scooter is charging the charger will glow red. When the unit is fully
charged the charger will glow green and then your Mobility Scooter is ready to go.
Warning
Do not leave the Boomerbuggy X Pro charging for long periods of me aer it is fully
charged. Once the Mobility Scooter is charged unplug it ASAP to avoid doing damage to
the baery.