EasyManua.ls Logo

Daymak Boomerbuggy X Pro - CONTROLS AND BRAKES; POTENTIOMETER DIAL AND FAN SPEED; BRAKES

Daymak Boomerbuggy X Pro
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Potentiometer Dial / fan Speed
Directly to the right of the start and stop bu on you
will nd the Poteniometer dial and the fan speed
switch.
1) Poten ometer Dial (Speed Dial) - This dial gives
more control to the minimum or maximum speed
your vehicle can go. When the knob is poin ng to
the le it will go its slowest and the right its fastest.
This combine with the speed switch on the previous
page will ul mately decide the maximum speed it
can go.
2) Fan Speed - Spin this dial clockwise to increase
the speed the fans blow air with 1 being the slowest
and 3 being the fastest. The number that is lit up
represents the speed its on. This also turns on the
A/C, as it is a bu on. Press this knob in to turn on
the A/C in conjunc on with the Air Condi oning
knob on the next page. Press it again to turn it o .
The air blows from the fan vents seen on the right.
These can be directed towards you or away from
you by pushing the middle sec on le or right.
Brakes
To engage the brakes on the Boomerbuggy X Pro
you will nd a pedal on the oor near the right
side. This pedal must be pressed to engage the
brakes.
The machine must be at a complete stop before
switching from forward to reverse.
Warning
Always keep a foot close to the pedal to stop
quickly in case of an immediate need to stop!

Related product manuals