Daymak EM2 - Page 15

15
When operating the EM2, insert the keys into the ignition
seen here and turn it clockwise.
Once on, simply turn the throttle towards you to ride.
When you are trying to engage the wheel lock: Turn the
handlebars so that it is pointing to the left and then push
the key in a bit further and turn to counter clockwise. This
feature will allow you to prevent theft.
Keys
e EM2 comes with two sets of keys and two remotes. ere are
four buttons on the remote:
1) Set Alarm - is button will set the alarm. Aer pressing it
wait for 5 seconds. Aerwards if someone moves the bike the
alarm will sound.
2) Remove alarm - is will disengage the alarm. Use this before
riding your bike. **Also disengeages remote start*
3) Panic Button - is will automatically set the alarm o
4) Remote Start - Press this twice to start the bike without using
the keys. Press the remove alarm button (2) to disengage the
remote start