16
Accessing your circuit breaker
To prevent surges, we have installed a circuit break-
er. If you are unable to get power to your bike more
than likely your circuit breaker has been triggered
and needs to be switched to the on position.
To do this:
Put the key in the lock seen here. It is located on the
le hand side of the bike. Turn it clockwise and li
up the seat.
Once you look inside you will see this circuit break-
er pictured to the right. Make sure the switch is set
to ON. If not ip the switch to ON to turn on the
power.
**Please note with the circuit breaker o the alarm
system doesn’t work **
e Speedometer
e Speedometer shows you three things:
1) Your current speed in km/h
2) Your trip / total odometer in kilometers travelled
3) Your battery level (between 5-0 bars)*
*Your current battery level is best represented by the
level shown when cruising at full speed*
To Next Page
Loading...
