Daytona mp26 - External Audio Sources; Connecting and Managing AUX Input

23
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
Setting the level display
The level display briefly provides a sym-
bolic display of the volume and the au-
dio control settings whilst you are ad-
justing them.
When settings are not being made, the
level display indicates the music level
of the car radio.
You can switch the music level display
on/off in the menu.
➮ Press the MENU button 4.
“MENU” appears on the display.
➮ Press the
or button 9 repeat-
edly until “PEAK LVL” appears on
the display.
➮ Press the
or button 9 to
choose between “PEAK ON” and
“PEAK OFF”.
When you have finished making your
changes,
➮ press the MENU button 4 twice.
External audio sources
Instead of connecting a CD changer,
you can connect another audio source
equipped with a line output. The audio
source, for example, can be a portable
CD player, MiniDisc player or MP3 play-
er.
The AUX input must be activated in the
menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this adapter ca-
ble (BP no.: 7 607 897 093) from your
authorised Blaupunkt dealer.
Switching the AUX input on/off
➮ Press the MENU button 4.
“MENU” appears in the display.
➮ Press the
or button 9 repeat-
edly until “AUX OFF” or “AUX ON”
appears in the display.
➮ Press the
or button 9 to
switch AUX on/off.
When you have finished making your
changes,
➮ press the MENU button 4.
Note:
● If the AUX input is switched on it
can be selected by pressing the
SRC
button 5 and it is shown
as “AUX INPUT” on the display.
LEVEL DISPLAY EXTERNAL AUDIO SOURCES
DaytonaMP26_EN2 3/15/06, 3:39 PM23