Need help?Do you have a question about the DaytonAudio SAT-BK and is the answer not in the manual?
Connect speakers to amplifier using 16 or 18 gauge wire, ensuring correct polarity with red binding posts.
Position speakers at ear height for front use, or to the side/behind for rear use. Corners enhance bass.
Details include driver sizes, frequency response, impedance, power handling, sensitivity, and dimensions.
5-year warranty against material/workmanship defects. Contact purchase location or customer support.
Excludes implied warranties, consequential damages, or damage from improper use.
Contact company for repair/replacement details, instructions, and fees for out-of-warranty service.
This document describes the Dayton Audio 2-Way Satellite Speaker Pair, model SAT-BK, designed for various audio applications, including home theater surround sound systems. These speakers are engineered to deliver a robust sound experience while maintaining a compact form factor.
The primary function of these speakers is to reproduce audio, serving as either front or rear speakers in a home theater setup, or for general sound reinforcement where space is a consideration. Each speaker is equipped with a 3-3/4" polypropylene woofer, which is responsible for producing strong bass and clear midrange frequencies. The woofer features a rubber surround, contributing to its durability and performance. For the higher frequencies, a 5/8" polycarbonate tweeter is integrated, designed to extend the high-end response, ensuring crisp and detailed treble. An engineered crossover network is incorporated into each speaker, which is crucial for smoothly blending the frequencies produced by the woofer and tweeter. This crossover ensures an even and balanced frequency response across the entire audio spectrum, resulting in a more natural and cohesive sound.
A notable usage feature of these speakers is their weather-resistant construction. This design aspect enhances their versatility, allowing them to be used in environments where they might be exposed to elements that typical indoor speakers cannot withstand. This makes them suitable for outdoor entertainment areas, covered patios, or other semi-exposed locations, expanding their potential applications beyond traditional indoor home theater setups.
For connection, the manual recommends using high-quality speaker wire, specifically 16 or 18 gauge, to link the speakers to an amplifier. Proper polarity is emphasized, with users instructed to connect all speakers consistently using the red binding post as positive. This attention to polarity is essential for maintaining proper phase relationships between the speakers, which is critical for accurate stereo imaging and overall sound quality. Incorrect polarity can lead to phase cancellation, resulting in a thin or diffuse soundstage.
Placement is a key aspect for optimizing the performance of these satellite speakers. When used as front speakers in a home theater system, they should ideally be positioned at approximately ear height relative to the listening position. They should also be placed several feet to the side of the viewing screen. The manual suggests that a wider spacing between the speakers will result in a wider listening area, allowing for a more immersive sound experience across a broader seating arrangement. For rear speaker applications in a 5.1 system, flexibility in placement is offered: the speakers can be located either directly to the side of the listening position or behind it. The optimal placement in this scenario often depends on the specific room layout and personal preference, as different arrangements can affect the surround sound field. Regardless of their role, the manual provides a tip for enhancing bass response: positioning the speakers at the junction of a wall and ceiling, or in a corner, can acoustically reinforce lower frequencies, leading to a more impactful bass. This phenomenon, known as boundary gain, leverages room acoustics to augment the speaker's low-frequency output.
Regarding maintenance, the manual implicitly suggests that the weather-resistant construction contributes to their durability and potentially reduces the need for frequent specialized care, especially in less demanding environments. However, while the speakers are weather-resistant, they are not necessarily waterproof, and extreme exposure to harsh weather conditions should likely be avoided to prolong their lifespan. General maintenance would involve keeping them clean and free from dust or debris, particularly around the speaker cones and tweeters, to ensure unobstructed sound output. The robust design, including the polypropylene woofer and polycarbonate tweeter, suggests a degree of resilience to environmental factors and physical wear, which simplifies long-term care.
The warranty information provided in the manual outlines the support structure for these devices. Dayton Audio products, including these satellite speakers, are warranted against defects in material and workmanship for a period of five years from the date of purchase. This extensive warranty period reflects confidence in the product's quality and durability. However, it's important to note that certain product categories, such as powered subwoofers and electronic devices, have a shorter one-year warranty. In the event of a product failure, customers are advised to contact their place of purchase or Dayton Audio's Customer Support Department.
The warranty limitations are clearly stated to manage expectations regarding coverage. Dayton Audio explicitly disclaims any other warranties, whether expressed or implied, including those of merchantability or fitness for a particular purpose, beyond what is explicitly stated. Furthermore, the company is not responsible for consequential or inconsequential damages to other audio system components, installation or extraction costs, or damages resulting from improper use of the products. Specific examples of improper use that void the warranty include burnt voice coils, overheating, bent frames, holes in the cone, or broken lead wires. These exclusions highlight the importance of proper handling, installation, and usage within the speaker's specified power handling limits to maintain warranty coverage. The warranty provides specific legal rights, and these rights may vary depending on the state or region.
For non-warranty service, if repairs or replacements are needed outside the warranty terms, customers can send the product to Dayton Audio for service. This process requires prior contact with the company to obtain details, complete instructions, and information regarding service fees, and the customer is responsible for prepaid transportation. This structured approach ensures that even products outside the warranty period can receive professional attention, albeit at the owner's expense.
In summary, the Dayton Audio SAT-BK satellite speakers are designed as versatile, compact audio solutions suitable for a range of applications. Their construction, featuring a polypropylene woofer and polycarbonate tweeter, along with an integrated crossover, aims to deliver balanced and clear audio. The weather-resistant design enhances their utility, allowing for flexible placement in various environments. Proper connection and strategic placement are key to maximizing their performance, especially in home theater setups. The comprehensive warranty and clear guidelines for service underscore Dayton Audio's commitment to product quality and customer support, while also defining the scope of responsibility for both the manufacturer and the user.
General| Model | SAT-BK |
|---|---|
| Speaker Type | Satellite |
| Frequency Response | 70 Hz - 20 kHz |
| Impedance | 8 ohms |
| Power Handling (RMS) | 40 watts |
| Power Handling (Max) | 80 watts |
| Sensitivity | 85 dB |
| Enclosure Type | Sealed |
| Weight | 4.5 lbs |
| Woofer Size | 4 inch |
To Next Page
