DaytonAudio T652 - User Manual

SPECIFICATIONS:
Model Number: T652
Description: 2-Way Tower Speaker Pair (Floorstanding)
Woofer: Dual 6-1/2" polypropylene cone with 4-layer coil
Tweeter: 5/8" polycarbonate dome with ferrofl uid cooling
Enclosure Type: Bass refl ex
Finish: Black ebony pica vinyl on particle board
Power Handling: 90W RMS/150W max
Impedance: 6 ohms
Response: 45 Hz to 20,000 Hz
Sensitivity: 88 dB 1W/1m
Crossover: First order high-pass, 4500 Hz
Terminals: Quick-connect spring-loaded terminals
Dimensions: 30" H x 7.1" W x 9.5" D
Depth includes grill*
* Grill is removable, acoustically-transparent cloth
Dayton Audio
®
Last Revised: 3/9/2015
daytonaudio.com
tel + 937.743.8248
info@daytonaudio.com
705 Pleasant Valley Dr.
Springboro, OH 45066
USA
DUAL 6-1/2"
2-WAY TOWER
SPEAKER PAIR
Model: T652 User Manual
WARNING: This product may contain a chemical or chemical[s] known to the State of
California to cause cancer or birth defects or other reproductive harm.
Warranty Information
Dayton Audio products are constructed by industry experts and thoroughly tested before shipment.
Dayton Audio products are warranted for the period of one year. This warranty is limited to
manufacturer defects, either in materials or workmanship. Dayton Audio is not responsible for any
consequential or inconsequential damage to any other unit or component, or the cost for installation
or extraction of any component of the audio system. In the rare case of a product failure, please
contact your place of purchase or call our Customer Support Department at (937) 743-8248.
Warranty Limitations
There are no other warranties, either expressed or implied, that extend the foregoing, and there are
no warranties of merchantability or fi tness for any particular purpose. The warranty will not cover
incidental or consequential damage due to defective or improper use of products. This includes but
is not limited to burnt voice coils, overheating, bent frames, holes in the cone, or broken lead wires.
This warranty gives you specifi c legal rights and you may also have other rights that vary from state
to state.
Non-Warranty Service: If non-warranty service is required, the product may be sent to the Company
for repair/replacement, transportation prepaid, by calling (937) 743-8248 for details, complete
instructions, and service fee charges.

Summary

Product Specifications

Model Number

Identifies the specific model of the speaker system.

Description

Details the type and configuration of the speaker system.

Woofer and Tweeter

Specifies the driver types, sizes, and materials used in the speakers.

Enclosure, Finish, and Power

Describes the speaker cabinet's design, external finish, and power handling capabilities.

Impedance, Response, Sensitivity, Crossover, Terminals

Details electrical and acoustic performance characteristics and connection types.

Dimensions

Provides the physical measurements of the speaker system.

Warranty and Service Information

Warranty Limitations

Outlines conditions and exclusions not covered by the manufacturer's warranty.

Non-Warranty Service

Provides instructions for obtaining repair or replacement outside the warranty period.

Using Your T652 Speakers

Parts Inventory and Installation Tools

Lists included components and notes that no specific tools are required for setup.

Speaker Placement

Offers guidance on optimizing speaker position for best sound quality and bass response.

Speaker Connection

Explains how to properly connect the speakers to an amplifier, emphasizing correct phasing.

Caring For Your Speakers

Provides instructions for cleaning and maintaining the speaker's finish and grilles.

Power Rating and Usage

Discusses amplifier compatibility, power limits, and avoiding distortion for optimal performance.

DaytonAudio T652 Specifications

General

Type	Tower Speaker
Frequency Response	45-20, 000 Hz
Impedance	8 Ohms
Woofer Size	6.5 inches
Tweeter Size	1 inch