EasyManua.ls Logo

DazeTechnology DazeBox - Introduction; Warning on Information Properties; Declaration of Conformity; Safety Information

DazeTechnology DazeBox
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Introduction
1.1. Warning on the properties of the information
The information contained in this manual belongs to DazeTechnology srl and may not be reproduced in
whole or in part.
This manual is supplied with the machine to the Customer.
The Customer must follow the instructions for use and maintenance indicated in this manual; otherwise
Daze Technology srl declines all responsibility. It is understood that the Customer is also required to use
the machine operating in the "intended use" conditions indicated in this manual in order to avoid damage to
persons or property.
1.2. Declaration of conformity
DazeTechnology srl declares that the DazeBox device complies with the requirements for the release of the
EC declaration of conformity, according to the Directive 2006/42 / EC Machinery and the Directive
2004/108 / CE emc.
1.3. Safety information
The device has been developed, constructed and checked in compliance with current safety regulations.
Therefore, the product does not normally entail any danger to people or things. The machine and its
components are designed in such a way that they cannot be used abnormally if this could lead to additional
risks for the user.
Daze Technology does not assume any responsibility for any damage to persons or things deriving from
not complying with safety regulations and these recommendations.
All machine installation, use and maintenance operations must be performed only by qualified and
authorized personnel. Daze Technology srl does not assume any responsibility for damage to persons or
things deriving from the use of unqualified operators.
Warnings!
Read these instructions carefully before using the device.
The device must be installed by qualified personnel.
Before working on the machine for maintenance or cleaning operations, disconnect the machine from
the power supply line by disconnecting the main plug. All machine installation, use and maintenance
operations must be performed only by qualified and authorized personnel.
3
ENG - June 2020 - Rev. 1

Related product manuals