Raider Mini 90 (single/double-seat): Service Manual Version：2.0 Feb. 2006
31
b) Remove the carburetor cap;
Remove the throttle cable from the
throttle valve while depressing the
throttle valve spring;
c) Remove the needle clip retainer, the jet
needle and needle clip;
Inspect the throttle valve and the jet
needle surface for wear, scratches or dirt.
z Disassembly
a) Unscrew the float chamber screws
and remove the float chamber:
b) Disassemble the float arm pin, float and
float needle valve. Inspect the seat of the
float needle valve for wear or damage:
Disassemble the idle jet, main jet, idle
speed;
Adjust screw and idle mixture
adjustment screw:
Throttle Valve Spring
Throttle Cable
Jet Needle
Carburetor Float Chamber
Float Float Needle Pin
To Next Page
Loading...
