Dazzle Digital Media HS Reader/Writer User’s Guide • Getting Started • Page 16
Installing the Software On a Macintosh
To begin using your Digital Media HS Reader/Writer with a Macintosh computer (Mac OS
9.x or higher required), you do not need to install any software. Simply connect the reader/
writer to your Mac’s USB port as described below, insert your media card, as described in
the section “Using the Digital Media HS Reader/Writer beginning on page 18, and access
the media, as described on page 30.
The Dazzle Installation CD includes the following Macintosh software components:
• Adobe Acrobat Reader (required for electronic documentation)
• Dazzle Technical Resource Center Information*
• Dazzle Products Demo Clips
• Dazzle Online Registration (English only)
• Electronic user’s guide (English only)
*You can also find information on Dazzle’s North American and European Technical
Resource Centers on page 42 and page 43 respectively.
To access any of the included software components, insert the Dazzle Installation CD in
your Mac’s CD/DVD-ROM drive, and then open the corresponding file or folder. To install
Adobe Acrobat Reader 5, open the Acrobat Reader 5.05 folder on the Dazzle Installation
CD, double-click the Acrobat Reader Installer icon, and follow the screen instructions.
Installing the Hardware on a Macintosh
You can connect your Digital Media HS Reader/Writer to computers with USB 1.1 or USB
2.0 ports. Computers with USB 2.0 ports transfer data at a much faster rate than comput-
ers with USB 1.1 ports
Connecting to a Macintosh USB Port
Connect the USB cable (attached to the back of the Digital Media HS Reader/Writer) to
the USB port on your Macintosh. Be sure the cable is properly aligned before connecting
and do not force the connection.
Connect USB cable
from Digital Media
Reader/Writer directly to
USB port on your
Macintosh
Digital Media HS Reader/Writer
To Next Page
Loading...
Need help?
General
