DB POWER C754 - Storage

User manual
26
/
28
5.1.5.5. Protected duration setting
After setting up alarm detect type and alarm trigger linkage, you need to set up protected duration.
You must set up it, then the camera perform trigger linkage; the time format is 7 days, 24 hours per day,
15 minutes per a block as Figure37.
Figure37
5.1.6. Storage
5.1.6.1. SD/TF Management
Access to SD management, you can check and download recording and snapshot file in SD card,
and check SD card remaining capacity, format SD as Figure38.
Figure38