DBL Technology GoIP-32 User Manual

DBL Technology Co., Ltd. GoIP User Manual
www.dbltek.com Technical Support: support@dbltek.com
42
This setting specifies the Call Forward method when the GSM channel is configured as the
server in HUNT Group mode.
1. Unconditional Call Forward – Incoming calls are always forwarded to an idle channel. If
all Client channels are in use, the Host channel answers an incoming call.
2. Call Forward Busy – The Host channel only forward in incoming call when the line is busy.
5.3.10 SIM
This section contains a set of parameters are related to the SIM Card of the channel selected. The Total Talk
Time Limit and the Talk Time Limit / Call can used to limit the phone usage of the SIM selected. It is useful
for customers who are using a sim card that has a higher calling rates when a certain limit is exceeded or at
different time periods. Please program this section as required. The *Auto Config. Other Line button is
provided to facilitate the programming of each channel. After the parameters for the CH1 SIM are set, clicking
this button automatically duplicates the same settings to all other channels with the exception that the SMS
Alert ID is incremented by 1 with respect to the ID of the previous channel.
The parameters for this section are described in details in the table below.
Parameter
(SIM Card)
Description
Default Value
1. GPRS Registration
This enables the GPRS registration mode for all GSM channels.
Enable
2. SIP Registration when
Talk Time Limit Expires
This parameter determines if SIP Registration is enabled or disabled when
Talk Time Limit expires. If it is enabled, incoming calls are still enabled
when Talk Time Limit expires.
Disable
The parameters below only apply to the channel selected.
3. GSM Number
This specifies the phone number of the SIM Card that is inserted to the
channel selected. This field MUST be specified when the Hunt Group mode
is enabled. Otherwise, GSM Call Forward cannot be setup properly.
4. IMEI
This specifies the International Mobile Equipment Identity number. The
device comes with a factory default value. Once changed, this value
cannot be restored.
Factory
Default
5. Unlock PIN1
SIM Card unlock PIN code 1
6. Unlock PIN2
SIM Card unlock PIN code 2
https://arttel.ru/
https://arttel.ru/shop/gsm-shlyuzy/gsm-shlyuz-goip-4

DBL Technology GoIP-32 Specifications

General

Brand	DBL Technology
Model	GoIP-32
Category	Gateway
Language	English