Need help?Do you have a question about the DBL Technology GoIP and is the answer not in the manual?
General| Type | VoIP GSM Gateway |
|---|---|
| Ethernet Ports | 1 |
| Protocols Supported | SIP |
| Codecs | G.711, G.729 |
| Network Protocols | TCP/IP, UDP, RTP, HTTP, DNS, DHCP |
| GSM Frequency | 850/900/1800/1900 MHz |
| SIM Slots | 1 or 4 (depending on model) |
| Ethernet Interface | 10/100 Mbps |
| Model | GoIP-1 or GoIP-4 (depending on SIM slots) |
Explains what GoIP is and its function as a VoIP GSM gateway.
Lists the communication protocols supported by the GoIP device.
Details the physical components and capabilities of the GoIP hardware.
Outlines the various software functionalities and features of the GoIP.
Lists all items included in the GoIP product package.
Explains the meaning of the status lights on the GoIP device.
Steps to access and log into the GoIP device's web interface.
Provides details on device status, including summary, general, GSM, and SIM call forwarding parameters.
Configures general device preferences like language, time zone, and servers.
Sets up network parameters for LAN, PC ports, and IP connectivity.
Configures fundamental settings for VoIP calls, including SIP modes.
Fine-tunes advanced VoIP parameters for optimized call performance.
Manages voice transmission parameters like jitter buffer and codecs.
Defines how GSM channels handle outgoing calls routed from VoIP.
Configures security measures for authenticating outgoing VoIP calls.
Specifies how incoming GSM calls are handled and routed.
Sets up authentication methods for incoming GSM calls.
Manages SIM card parameters, including talk time limits and registration.
Configures call forwarding rules for SIM cards based on different conditions.
Allows modification and auto-changing of device IMEI numbers.
Sets up parameters for handling received and sent SMS messages.
Configures the selection mode for GSM service providers.
Manages settings for selecting GSM base stations and cell IDs.
Process for upgrading the device firmware via the network.
Allows users to change passwords for different access levels.
Enables sending USSD commands to the GSM network.
Interface for composing and sending SMS messages.
View received SMS messages on the device.
Manage the operational status of individual GSM channels.
Save and load device configuration settings.
Restores the device to its original factory default settings.
Restarts the GoIP device to apply changes or resolve issues.
To Next Page
