DBL Technology GoIP - Appendix A: Special SMS Commands

GoIP User Manual
http://www.dbltek.com
54
Appendix A. Special SMS Commands
In order to manage the device, special SMS commands can be sent to anyone of the GSM channel in order to
read the LAN IP, reset the device and reboot the device. The table below summarizes the SMS command
syntax. “<” and “>” are not part of command text.
SMS Message Content
Function
###INFO### Sends an SMS response to the sender with the LAN port IP address.
###info###
RESET <password>. Reset the device configuration back to the factory defaults and then reboot the
device.
<password> is the password for the administration level.
reset <password>
REBOOT <password>
Reboot the device.
<password> is the password for the administration level.
reboot <password>