GoIP User Manual
http://www.dbltek.com
This page covers parameters that are related to SMS. The top parameter (SMS to VoIP) is a general setting for all
channels. This defines how received SMS messages are used for Call Back or Forward functions which are
described in details in the table below.
Parameter Description Default Value
This defines how the device handles received SMS messages.
1. Call Function – This mode is used to support Call Back function via
incoming GSM messages. Appendix B describes the three different
modes of operations in order to meet the different requirements from
various SIP servers. Please note that the SIP server registered must be
configured for this operation.
This parameter specify which SMS Dial mode is used. Please refer to
Appendix B for more information on the modes available.
The parameter is applicable for SMS Dial mode. It allows a prefix to be
added to the phone number of the called party.
2. Forward Function – This mode forwards incoming GSM SMS to a SIP
terminal and a GSM number.
Incoming GSM messages (SMS) received are forwarded to the SIP Phone
Number specified in this parameter.
Incoming GSM messages (SMS) received are forwarded to the GSM Phone
Number specified in this parameter. The channel received the message is
used to forward the message.