DBL Technology GoIP User Manual

GoIP User Manual
http://www.dbltek.com
45
Next, the parameters defined below are channel dependent. Please make sure that the desired channle is
selected before making changes.
Parameter
(SIM Card)
Description Default Value
1. SMS Server
 SMS Server IP
 SMS Server Port
 SMS Client ID
 Password
SMS Server is a Linux based utility which is used to manage GoIPs
registered to send and receive SMS messages. In addition, it also keeps
an activity logs of each channel. It is a free utility offered by the GoIP's
manufacturer and can be downloaded from the URL below.
http://www.dbltek.com/download.html
For more information, please visit our website or contact
support@dbltek.com.
Once the SMS Server is installed and in operation. The following
parameters are require to enable the GoIP to register to the SMS Server.
Please note that each channel must be programmed individually in order
to register to the SMS Server.
This specifies the domain name or ip address of the SMS server.
This specifies the communication port that is used by the SMS server.
This must match the port value set in the SMS server.
This specifies the login ID for the channel selected. SMS Client ID and
password must first be created in the SMS Server.
This specifies the login password for the SMS Client ID.
2. Validity Period
This specifies the message expiration time in the Message Center. When
this period expires, the undelivered message is discarded. The Validity
Period (VP) is an integer from 0 to 255 and
VP Value Actual Time
0 - 143 (VP+1) x 5 minutes (i.e. 5 minutes intervals up to 12
hours)
144 - 167 12 hours + ((VP-143) x 30 minutes)
168 - 196 (VP - 166) x 1 day
197 - 255 (VP - 192) x 1 week
3. Send SMSC Number When this option is enabled, the SMSC Number stored on the SIM card is
read and sent to the Message Center when sending a message.
4. SMS to Email
 Outgoing Email Server
(SMTP)
 User Name
 Password
 Forwarding Email
Address
This enables the forwarding of SMS received via the channel selected to a
designated email address.
This specifies the SMTP Server for sending emails.
This specifies the User Name for SMTP Server authentication. Leave this
blank if authentication is not required.
This specifies the Password for SMTP Server authentication. Leave this
blank if authentication is not required.
This specifies the email recipient of the forwarded SMS.

DBL Technology GoIP Specifications

General

Brand	DBL Technology
Model	GoIP
Category	Gateway
Language	English