To Next PageTo Next Page
Need help?Do you have a question about the DBL Technology GoIP-1 and is the answer not in the manual?
General| Device Type | VoIP Gateway |
|---|---|
| Channels | 1 |
| SIM Slots | 1 |
| GSM Frequency | 850/900/1800/1900 MHz |
| Network | GSM |
| Ethernet Ports | 1 |
| Ports | 1 |
| Network Interface | Ethernet |
| Protocols | SIP |
| Voice Codecs | G.711, G.723.1, G.729A/B |
| Echo Cancellation | G.168 Echo Cancellation |
| Power Supply | 12V DC |
Explains GoIP/WoIP as GSM over IP and WCDMA over IP gateways.
Lists the communication protocols supported by the device.
Details the physical components and specifications of the device.
Outlines the operating system and software functionalities.
Lists the items included in the device package.
Explains the meaning of the device's LED lights.
Details the procedure for inserting SIM cards into the device.
Explains the purpose and connection of LAN and PC RJ-45 ports.
Describes power connection and the reset button functionality.
Explains how to access the device's web interface for configuration.
Describes how to view the current operational status of the device.
Provides an overview of the device's VoIP and GSM statuses.
Covers hardware, network, and call status information for debugging.
Displays current GSM channel status and SIM card information.
Lists current SIM call forward settings for each channel.
Allows configuration of language, time zone, and server settings.
Discusses network configuration for optimal voice call performance.
Covers SIP and H.323 protocol selection and basic call handling.
Covers SIP listening port, INVITE response, and authentication.
Allows programming of media transmission settings like RTP and codecs.
Defines how GSM channels handle calls routed from VoIP.
Defines authentication methods for outgoing VoIP calls via GSM.
Describes how incoming GSM calls are processed and routed.
Defines authentication methods for incoming GSM calls.
Covers SIM card parameters like GPRS registration and talk time limits.
Configures GSM call forwarding settings based on conditions.
Allows IMEI modifications and explains IMEI structure.
Defines settings for SMS to VoIP, SMS delivery reports, and SMS server.
Sets the mode for GSM service provider selection (Auto or Fixed).
Allows manipulation of GSM base station selection.
Configures predefined actions based on detected events.
Provides access to device maintenance and diagnostic functions.
Allows upgrading the device firmware.
Explains how to change passwords for different login levels.
Describes how to send USSD commands to the service provider.
Explains how to send SMS messages from the device.
Allows viewing received SMS messages.
Allows viewing sent SMS messages.
Enables shutting down or enabling GSM channels.
Tests network reachability to domain names or IP addresses.
Manually dials calls via selected lines or channels.
Retrieves the phone number of the connected SIM card.
Allows backup and restore of device configuration.
Resets the device configuration to factory defaults.
Restarts the device.
