DBL Technology GoIP-1 User Manual

DBL Technology Co., Ltd. GoIP User Manual
www.dbltek.com Technical Support: support@dbltek.com
57
2. Specify the number of ping messages to be sent in the “Ping Count” field.
3. Press to start the Ping Test. The test results are then displayed in the window below.
5.4.9 Dial Test
The Dial Test enables the GoIP to dial out a call manually via the line or channel selected.
1. Select the Line that you want to make an outgoing call.
2. Enter the phone number of the called party in the “Phone Number” field.
3. Enter the call duration in the “Duration” field. When the call duration of an outgoing reaches
the time specified, it will be terminated automatically.
5.4.10 Get Number
Get Number enables the GoIP to retrieve the phone number of the SIM card connected. Both SMS and
USSD methods are supported; however, the actual procedures in getting the phone number may still vary
between carriers. Please find out the actual procedures in retrieving the phone number from your carrier
first and then try to configure the GoIP to perform the procedures.
Please contact technical support if GoIP does not support the procedures required by your carrier.
https://arttel.ru/
https://arttel.ru/shop/gsm-shlyuzy/gsm-shlyuz-goip-4

DBL Technology GoIP-1 Specifications

General

Brand	DBL Technology
Model	GoIP-1
Category	Gateway
Language	English