Need help?Do you have a question about the dbx 160A and is the answer not in the manual?
General| Type | Compressor/Limiter |
|---|---|
| Maximum Input Level | +24 dBu |
| Maximum Output Level | +24 dBu |
| Frequency Response | 20Hz-20kHz, +0/-0.5dB |
| THD+N | <0.1% |
| Compression Ratio | 1:1 to ∞:1 |
| Inputs | XLR and 1/4" Balanced/Unbalanced |
| Outputs | XLR and 1/4" Balanced/Unbalanced |
| Signal to Noise Ratio | Greater than 90 dB |
| Power Supply | 100-240V, 50/60Hz |
Essential safety precautions regarding electrical shock, fire hazards, and proper usage.
Statement regarding the unit's compliance with electromagnetic interference standards.
Formal declaration of the product's adherence to safety and EMC directives.
Concise steps to get the dbx 160A unit operational quickly.
Overview of the dbx 160A compressor/limiter and its key features.
Explanation of the Bypass and Stereo Slave buttons and their LEDs.
How to set the compression threshold and ratio using front panel controls.
Understanding the LED displays for input/output levels and gain reduction.
Adjusting output gain and selecting input/output metering on the LED display.
An introduction to the various input, output, and control jacks on the rear panel.
Details on balanced/unbalanced input and output connections using XLR and 1/4" jacks.
Information on the detector input for sidechaining and calibrating the meter display.
How to link units for stereo operation and connect AC power.
Guidance on basic operation, including how the Threshold control functions.
Understanding the Compression Ratio control and its effect on signal dynamics.
Techniques for smoothing vocals and enhancing musical instruments.
Using compression to prevent tape saturation and digital overload.
Protecting loudspeakers and enhancing live PA sound levels.
Using the unit to reduce feedback and as a line amplifier.
Applying frequency-weighted compression via a sidechain insert.
Techniques for reducing sibilance (de-essing) and increasing instrument sustain.
Integrating with multi-way speaker systems and broadcast pre-emphasis.
Using a delay line for sidechaining to anticipate signal changes.
Step-by-step guide for making basic audio connections to the unit.
Instructions for linking multiple 160A units for stereo or multi-channel operation.
Connecting external devices to the detector input for advanced sidechaining.
Examples of connecting to mixing boards and various musical instruments.
General advice on hookups and cabling for the 160A.
Details on balanced and unbalanced cable configurations for inputs and outputs.
Techniques for resolving hum issues using the ground lift switch.
Information on obtaining technical assistance and factory service.
Instructions for product registration and overview of the limited warranty.
To Next Page
