Need help?Do you have a question about the dbx DriveRack PA2 and is the answer not in the manual?
General| Input Channels | 2 |
|---|---|
| Output Channels | 6 |
| Frequency Response | 20 Hz - 20 kHz, +/- 0.5 dB |
| Dynamic Range | >110 dB |
| A/D Conversion | 24-bit |
| D/A Conversion | 24-bit |
| Sample Rate | 48 kHz |
| Crossover | Yes |
| Delay | Yes |
| Subharmonic Synthesizer | Yes |
| Wi-Fi Control | Yes |
| Display | LCD |
| Rack Spaces | 1U |
| EQ | 8-band PEQ |
| Feedback Suppression | Yes |
| Control | Front panel |
| Dimensions | 19 x 1.75 x 8.5 inches |
| Compressor | dbx Compressor |
| Mounting | Rack mountable |
| Power Supply | 50/60 Hz |
| THD + Noise | 0.003% typical at +4dBu, 1kHz, 0dB gain |
Register product online; warranty covers defects in materials and workmanship under normal use.
Obtain Return Authorization Number before returning products for service. Contact Technical Support for assistance.
Includes LCD display, BACK, DATA Wheel, WIZARD, PRESET, UTILITY, and RTA MIC INPUT.
IEC power inlet, Ethernet for network control, and USB for firmware updates.
XLR inputs for sources and XLR outputs for speakers/amplifiers.
Install in a 19" rack ensuring proper airflow and avoiding heat and interference.
Connect mixer outputs to PA2 inputs and PA2 outputs to amplifiers/speakers with power off.
Connect PA2 to network via Ethernet or Wi-Fi for control app operation.
Sequence for powering up/down mixer, PA2, and amplifiers to prevent damage.
Step-by-step guidance for system setup, optimization, and feedback elimination.
Assists with speaker balancing, room EQ, and overall system optimization.
Guides users to identify and remove feedback frequencies for increased gain.
PA2 configures settings based on selected speaker/amplifier models or 'NOT LISTED' defaults.
Guides for choosing crossover points, filter types (BW/LR), and slopes for driver alignment.
Calibrate gain staging and set limiter thresholds to prevent clipping and maximize headroom.
Process to identify and notch feedback frequencies for improved system gain.
Faster, more precise feedback detection and elimination with minimal impact on audio quality.
Resets all user presets and utility settings to factory defaults.
Resets only utility settings to factory defaults, preserving user presets.
To Next Page
