59
®
Technical Information
Firmware Updates
The USB or Ethernet connector on the back panel of the PA2 can be used to perform firmware updates. Connect the USB
port to a Windows
®
PC for performing firmware updates using the PA2 Firmware Update Utility application. As firmware
updates becomes available, the Firmware Update Utility application will be available on the PA2 product page at dbxpro.com.
If using the DriveRack PA2 control app, you can update the PA2 via the Ethernet port straight from the application, regardless
of the device you’re using for control (i.e., iOS
®
, Android
™
, Mac
®
, or Windows
®
device). Follow the included instructions provided
with each application to perform the update procedure.
To Next Page
Loading...
