Need help?Do you have a question about the dbx 160S and is the answer not in the manual?
General| Type | Compressor/Limiter |
|---|---|
| Sidechain | Yes |
| Signal to Noise Ratio | >90dB |
| Solid-state | Yes |
| Inputs | 1 x XLR, 1 x 1/4" |
| Outputs | 1 x XLR, 1 x 1/4" |
| Ratio | 1:1 to ∞:1 |
| Channels | 1 |
| Frequency Response | 20Hz-20kHz |
Explains the need for compressors in audio processing to manage dynamic range.
Differentiates the function and operation of compressors and limiters.
Illustrates the visual effects of compression and limiting on audio signals.
Introduces limiter functions and the PeakStopPlus™ technology for peak control.
Illustrates standard methods for connecting the compressor to audio systems.
Covers OverEasy, Threshold, Compression, Attack, Release, and Stop Level controls.
Details Auto mode, PeakStopPlus™ LED, Sidechain switch/LED, and Bypass.
Covers VU Meter, Peak LED, Output Gain, and meter selection modes.
Explains Stereo Couple switch and Power LED status.
Describes XLR connectors, ground lift, balancing, and ground binding posts.
Covers sidechain I/O, AC power connection, and optional digital output panel.
Compares OverEasy, hard knee, and explains compression control usage.
Explains stereo coupling and automatic operation for enhanced flexibility.
Details how to use PeakStop and PeakStopPlus limiters for protection.
Offers practical advice for smoothing levels, instrument processing, and feedback reduction.
Covers frequency-weighted compression, de-essing, and ducking.
Provides contact info for technical assistance and factory service procedures.
Details the terms and conditions of the product warranty.
To Next Page
