Need help?Do you have a question about the dbx 266 and is the answer not in the manual?
General| Sidechain Inserts | 1/4" TRS |
|---|---|
| Ratio | 1:1 to Infinity:1 |
| Type | Compressor/Gate |
| Inputs | XLR and 1/4" balanced/unbalanced |
| Outputs | XLR and 1/4" balanced/unbalanced |
| Threshold | -40dB to +20dB |
| Frequency Response | 20Hz to 20kHz, ±0.5dB |
| Total Harmonic Distortion | <0.5% @ +4dBu, 1kHz |
| Signal to Noise Ratio | >90dB |
| Dimensions | 1.75" x 5.75" x 19" (4.45 cm x 14.6 cm x 48.26 cm) |
Lists common uses for the compressor function of the dbx 266 unit.
Lists common uses for the gate/expander function of the dbx 266 unit.
Verifies that all items are present in the dbx 266 package upon arrival.
Provides a step-by-step guide to getting the dbx 266 operational quickly.
Details the terms and conditions of the dbx 266 limited warranty.
Explains the function of buttons, LEDs, and knobs on the dbx 266 front panel.
Details compressor parameters (Threshold, Ratio, Attack, Release) and suggested settings.
Details gate/expander parameters (Threshold, Ratio) and suggested settings.
Describes rear panel jacks, side chain insert, and AC power supply connection.
Illustrates how to connect the dbx 266 to various audio sources and destinations.
Provides contact details, troubleshooting advice, and shipping instructions for service.
Instructions for shipping the unit for service and providing user feedback.
Lists detailed technical data including frequency response, impedance, and dimensions.
To Next Page
