OTHER CONSIDERATIONS: It is useful to keep in mind the active and passive bypass systems in these
equalizers. When the power is ON the EQ IN/OUT switch (active bypass) removes the equalizer
from the signal path except for buffer amplifiers, HI CUT and LO CUT filters. Should the power to the
unit fail or the power be turned off, the passive bypass completely removes the equalizer from the
signal path allowing the signal to pass through the equalizer completely unaffected.
There is an optional Input and/or Output Transformer kit available for the 30 Series equalizers which
may be installed for special applications. Contact your dealer or contractor for more information
regarding this product.
INSTALLATION CONSIDERATIONS
30 SERIES GRAPHIC EQs
To Next Page
Loading...
