Need help?Do you have a question about the dbx 1231 and is the answer not in the manual?
General| Frequency Bands | 31 per channel |
|---|---|
| Maximum Input Level | +21 dBu |
| Maximum Output Level | +21 dBu |
| Filter Type | Constant Q |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Number of Channels | 2 |
| Input Connectors | XLR, 1/4" TRS |
| Output Connectors | XLR, 1/4" TRS |
| Bands | 31 |
| Frequency Range | 20 Hz to 20 kHz |
| Signal-to-Noise Ratio | >90dB |
| Dimensions | 3.5" x 19" x 7.9" (8.9 cm x 48.3 cm x 20.1 cm) |
| Type | Graphic Equalizer |
| THD+N | <0.005% |
| Input Impedance | Balanced 40kΩ, Unbalanced 20kΩ |
| Total Harmonic Distortion | <0.05% |
| Boost/Cut Range | ±12dB |
Essential warnings and instructions for safe operation and protection.
Instructions for safe connection and use of the power cord.
Steps and considerations for connecting the equalizer to an audio system.
Advice on using the graphic equalizer for audio system tuning.
Detailed specifications for input and output connectors, impedance, and levels.
Technical performance data including bandwidth, frequency response, and dynamic range.
Description of the equalizer's function switches and visual indicators.
To Next Page
