Do you have a question about the dbx 1215 and is the answer not in the manual?
Type | Stereo Equalizer |
---|---|
Frequency Bands | 15 |
Input Connectors | XLR, 1/4" TRS |
Input Type | Balanced/Unbalanced |
Output Connectors | XLR, 1/4" TRS |
Output Type | Balanced/Unbalanced |
Frequency Range | 20Hz - 20kHz |
Signal to Noise Ratio | >90dB |
Boost/Cut Range | ±12dB |
Range | ±12dB |
Input Impedance | >40kΩ balanced |
Maximum Output Level | +21dBu |
Power Requirements | 100-240 VAC, 50/60 Hz |
Noise | < -90 dBu |
Covers essential warnings for safe operation, including protection from liquids, ventilation, and power handling.
Details on power cord connection, wire coloring, grounding importance, and potential hazards.
Specific warnings for UK plugs, EMC, and lithium battery handling and disposal.
Information on product warranty terms and official declarations of compliance with standards.
Overview of dbx graphic equalizers and their high-performance features.
List of items to verify upon receiving the equalizer unit.
Details on input gain, EQ bypass functions, and boost/cut range selection.
Explanation of output level bar graph, clip LED, and low-cut filter switch.
Description of the slider potentiometers for frequency adjustment.
Details on power switch, power cord receptacle, input/output connectors, and wiring.
Explanation of the chassis ground lift strap and its role in preventing ground loops.
Guidance on balanced/unbalanced connections, input/output impedance, and cable types.
Notes on using EQs for frequency control, system tuning, and optimal gain structure.
Detailed technical specifications for inputs and outputs, including connectors, impedance, and levels.
Data on bandwidth, frequency response, dynamic range, signal-to-noise, THD, and crosstalk.
Explanation of EQ bypass, low cut, range switches, and output level/status indicators.
Specifications for operating voltage, power consumption, and mains connection type.
Provides dimensions and weight for both 1215 and 1231 models.