Need help?Do you have a question about the dbx 231s and is the answer not in the manual?
Inputs| input connectors | 1/4” TRS, female XLR (pin 2 hot) |
|---|---|
| input impedance (balanced) | 40kΩ |
| max input level | 21dBu balanced or unbalanced |
Outputs| output connectors | 1/4” TRS, male XLR (pin 2 hot) |
|---|---|
| output impedance (balanced) | 100Ω |
| max output level | 21dBu balanced/unbalanced into 2kΩ or greater |
System Performance| bandwidth | 20Hz to 20kHz, +0.5/-1dB |
|---|---|
| dynamic range | 112dB |
| signal-to-noise ratio | 95dB |
Power Supply| operating voltage | 100-240VAC 50/60Hz |
|---|---|
| power consumption | 15W |
| mains connection | IEC receptacle |
Physical| weight | 6.2 lbs (2.81 kg) |
|---|---|
| shipping weight | 7.9 lbs (3.58 kg) |
| dimensions | 3.5” (8.9cm) H x 6” (15.24cm) D x 19” (48.26cm) W |
Instructions for customers regarding power cord connection and wiring safety.
Essential warnings for user protection and proper equipment operation.
Cautionary notes regarding lithium battery safety and replacement procedures.
Specific safety warning for UK mains plug usage and fuse replacement.
Information on FCC compliance and operational conditions for EMC.
Manufacturer's declaration of product conformity to safety and EMC standards.
List of items to verify in the equalizer's package upon receipt.
Input gain, EQ bypass, and boost/cut range selection controls.
LED indicators for output level monitoring and clipping warnings.
Sliders used to boost or cut specific frequency bands.
Instructions for rack mounting, considering heat and interference.
Guidance on using balanced/unbalanced connections and potential issues.
Details on AC power receptacle, output, and input connector types.
Information on input/output impedance and cable configurations.
Details on connectors, impedance, levels, bandwidth, and dynamic range.
Details on function switches, operating voltage, and power consumption.
Dimensions and weight specifications for the different models.
To Next Page
