Need help?Do you have a question about the dbx CX-2 and is the answer not in the manual?
Important warnings regarding electrical shock, fire hazards, and proper handling.
Specific safety guidelines for customers in the United Kingdom regarding mains wiring.
Connect the ground wire from a record player to reduce hum.
Jacks for connecting input sources like PHONO, TUNER, CD players.
Connecting cassette and reel-to-reel tape decks for recording and dubbing.
Connecting to main amplifiers via NORMAL or DIRECT outputs.
Connecting external audio processing devices like equalizers.
Unswitched AC outlets for powering associated audio equipment.
Displays the nominal AC line voltage setting of the unit.
Connection points for power supply and remote control system.
Guidance on matching unit power requirements to local area standards.
Controls the CX-2's power and indicates its operational status.
Selects monitoring or recording modes and chooses audio sources.
Buttons for processor recording and mode selection.
Buttons to switch audio processors in or out of the signal path.
Selects tape decks for recording or dubbing.
Controls output amplifier and temporary volume reduction.
Adjusts sound gain/volume and channel balance.
Selects phono preamp type and provides headphone output.
Overview of remote transmitter capabilities and range.
Procedure to activate the remote transmitter for the CX-2.
Steps to ensure correct settings for monitoring audio sources.
Procedure for selecting sources and tape decks for recording.
Steps to select source tape deck and destination tape deck for dubbing.
Steps to monitor audio sources when using external processors.
Procedure for recording processed audio signals onto tape decks.
To Next Page
General
