Need help?Do you have a question about the dbx 576 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Phantom Power | 48V |
| Inputs | XLR |
| Outputs | XLR |
| Tube Type | 12AX7 |
| Frequency Response | 20Hz to 20kHz |
| Total Harmonic Distortion | < 0.1% |
| Output Impedance | 50Ω |
| Controls | Gain, Phantom Power |
| Sidechain I/O | Yes |
| Metering | LED Meter |
Important safety precautions for appliance use, power, and servicing to prevent hazards.
Controls for input selection, tube stage gain, phantom power, pad attenuation, and phase inversion.
Manages the PeakPlus™ Limiter threshold and indicates when limiting is active.
Core controls for setting compression parameters: threshold, ratio, attack time, and release time.
Enables a softer, smoother compression transition, reducing artifacts for a more natural sound.
Details how the ratio control determines compression intensity and illustrates compression curves.
Details manual attack/release times and the AUTO mode for program-dependent dynamics.
Sets the threshold level for the PeakPlus™ Limiter circuit.
Specifications for EQ frequencies, compressor parameters, and operational modes.
Details of the PeakPlus™ Limiter and system performance metrics like bandwidth and EIN.
Details power supply voltage, consumption, fuse, and physical dimensions/weight.
To Next Page
