Need help?Do you have a question about the dbx AFS2 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Inputs | XLR, 1/4" TRS |
| Outputs | XLR |
| Frequency Response | 20Hz - 20kHz |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Dimensions | 19" |
Describes the AFS2 as a second-generation feedback suppression processor from dbx.
Lists key features such as AFS technology, bit converters, filter modes, and user presets.
Explains the benefits of AFS over traditional methods, focusing on precision and sonic integrity.
Details how to connect the AFS2 to a sound system using balanced or unbalanced lines.
Describes the correct procedure for powering up the AFS2 and the PA system.
Details the controls and indicators on the front panel of the AFS2, including meters and buttons.
Guides on the process of 'ringing out' a system for optimal gain before feedback.
Instructions on using the AFS2 Wizard for automated setup and ring-out.
Step-by-step guide for manually ringing out the sound system using Fixed filters.
Details parameters for channel selection, bypass, filter mode, and content mode.
To Next Page
