EasyManua.ls Logo

DC MONT DC-MPPT-MPK2-40A - Page 10

DC MONT DC-MPPT-MPK2-40A
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MONT
Sound Setting: To set sound, long press on the time interface to turn on/off sound.
Total Capacity Count: Maximum total charging / discharging capacity is 65KAH. Once over 65KAH,
the count starts again from 0 Ah. On the main display, press to enter the capacity interface. Then
long press over 5s to restart charging capacity count. Long press over 5s to restart
discharging capacity count.
Restore Factory Settings: On the capacity interface, long press to restore factory settings.
M
Time and Date Setting: On the main display, press to enter the time interface. Then long press
for over 5s to enter the setting interface. From left to right, it is date, month, hour, minute, year
and day of week. Short press or to modify, and long press for over 5s to save. Short
press to switch. Month: 1~9 stands for January~September; O stands for October; N stands for
November; D stands for December.
M
M
M
Panel Voltage Display: On the main display, long press for over 5s to check PV voltage.
5
5
5
5
5
date month hour minute date of week year date of week