MONT
Main Display
On the main display, you can check charging & discharging current, battery voltage, system voltage,
battery type, etc. Press to the time interface displaying time and date. Press to the capacity
interface displaying charging & discharging capacity.
Interface will remain if the machine works well. It will switch automatically to the fault interface (check
ERROR CODE CHART in this manual for information) after 15s if something is out of work. Press
/ to exit the fault interface.
LCD Display Interface
Load On/Off Setting: On the main display, press to switch on/off the load.
M
OPERATING THE CONTROLLER
LCD Display Interface Overview
1
2
3
4
5 6
7
8
9
10
11
1. Solar panel
2. Working status
3. System voltage level
4. Charging
5. Battery capacity
6. Discharging
7. Battery type
8. Load working mode&status
9. Unit
10. Day/night
11. Characters
To Next Page
Loading...